Legacy Installation Instructions

To install the legacy software, choose the appropriate option below based on which information you can supply.

Product Code Software Bundle Pin Number

Product Code

I do not have an account
I already have a Korg User Account


I do not have a Korg User Account and want to install the Legacy Software with a Product Code.

  1. Please install the Legacy software on your computer by clicking on the following link. https://www.korguser.net/asp/downloadPurchased.asp
  2. When you launch the software, a popup screen will appear with the Locking Code. The Product Code and Locking Code are both required to set up a new Korg User account, as well as register and authorize the Legacy software.
  3. Go to www.korguser.net to create a new Korg User account by pressing “NEW USERS CLICK HERE”.
  4. Please fill out the appropriate personal information, select “Korg Legacy Collection Series”.
  5. Enter the Product Code, Locking Code and then click on “Next”.
  6. You will be presented with a long License Code with “#” at the end in red.
  7. Go back to the Legacy software, click on “License Authorization” and “Next”.
  8. Copy this License Code into the appropriate field and click “Enter”. The software will authorize instantly.


To install additional Legacy software with a Product Code:
  1. From inside your Korg User Account at www.korguser.net, please click “Download for registered users” on the home page to install the next Legacy software.
  2. Open the newly installed software and write down the Locking Code.
  3. Go back to the home page of your user account and choose “Register Product”.
  4. Choose the “Korg Legacy Collection Series” in the Drop-Down menu on the Registration page.
  5. Enter the Product Code, Locking Code and click on “Next”.
  6. You will be presented with a long License Code with “#” at the end in red.
  7. Go back to the Legacy software, click on “License Authorization” and “Next”.
  8. Copy this License Code into the appropriate field and click “Enter”. The software will authorize instantly.


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


I have a Korg User account and want to install the Legacy software with a Product Code.
  1. Go to www.korguser.net and sign into your Korg User account.
  2. Please click “Download for registered users” to download the Legacy software.
  3. Open the newly installed software and write down the Locking Code.
  4. Go back to the home page of your user account and choose “Register Product”.
  5. Choose the “Korg Legacy Collection Series” in the Drop-Down menu on the Registration page.
  6. Enter the Product Code, Locking Code and click on “Next”.
  7. You will be presented with a long License Code with “#” at the end in red.
  8. Go back to the Legacy software, click on “License Authorization” and “Next”.
  9. Copy this License Code into the appropriate field and click “Enter”. The software will authorize instantly.

Software Bundle Pin Number

I do not have an account
I already have a Korg User Account


I do not have a Korg User account and want to install the Legacy software with a Software Bundle PIN #.

Please follow the steps below to install and authorize your Legacy Software that is part of the software bundle. The instructions also include the steps for creating a Korg User Account which is required.

  1. Please enter the PIN number that appears on the card that came with your controller at www.korg-license-center.com. Please make sure you enter in a zero and not the letter “O” if applicable. There, you will receive your Product Code / Authorization Code for each Legacy software.
  2. Download one of the Legacy software using the “Download” link. When you launch the software, a popup screen will appear with a Locking Code that is required to set up a Korg User account and authorize the software.
  3. Go to www.korguser.net to create a new Korg User account by pressing “NEW USERS CLICK HERE”. Please fill out the appropriate personal information, select “Korg Legacy Collection Series”, enter the Product Code and Locking Code.
  4. Then click on “Next” which will provide you with a long License Code with “#” at the end in red.
  5. Go back to the Legacy software, click on “License Authorization” and “Next”.
  6. Copy this License Code into the appropriate field. Click “Enter” and the software will authorize instantly.
  7. From inside your Korg User Account at www.korguser.net, please click “Download for registered users” on the home page to install the next Legacy software.
  8. Open the newly installed software and write down the Locking Code.
  9. Go back to the home page of your user account and choose “Register Product”.
  10. Choose the “Korg Legacy Collection Series” in the Drop-Down menu on the Registration page.
  11. Enter the Product Code, Locking Code and click on “Next”.
  12. The next screen will generate a long License Code with “#” at the end in red.
  13. Go back to the Legacy software, click on “License Authorization” and “Next”.
  14. Copy this License Code into the appropriate field. Click “Enter” and the software will authorize instantly.
As far as installing and registering the 3rd party software, please follow the steps provided at www.korg-license-center.com. You will need to contact each individual company if you need any assistance.


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


I have a Korg User account and want to install the Legacy software with a Software Bundle PIN #.

Please follow the steps below to install and authorize your Legacy Software that is part of the software bundle.

  1. Please enter the PIN number that appears on the card that came with your controller at www.korg-license-center.com. Please make sure you enter in a zero and not the letter “O” if applicable. There, you will receive your Product Code / Authorization Code for each Legacy software.
  2. Go to www.korguser.net and sign into your Korg User account.
  3. Please click “Download for registered users” to download the Legacy software.
  4. Open the newly installed software and write down the Locking Code.
  5. Go back to the home page of your user account and choose “Register Product”.
  6. Choose the “Korg Legacy Collection Series” in the Drop-Down menu on the Registration page.
  7. Enter the Product Code, Locking Code and click on “Next”.
  8. The next screen will generate a long License Code with “#” at the end in red.
  9. Go back to the Legacy software, click on “License Authorization” and “Next”.
  10. Copy this License Code into the appropriate field and click “Enter”. The software will authorize instantly.
As far as installing and registering the 3rd party software, please follow the steps provided at www.korg-license-center.com. You will need to contact each individual company if you need any assistance.
Join Our Korg USA Family
Sign up to get insider information on new Korg USA products, artists, deals & more.